Passion Project

 

Well the winter we had to have has arrived with rainfall and low temperatures. That’ll be a great relief to the local farmers, although I don’t think they’ll be dancing in the street. This has meant that I’ve not been out and about much so I’ve been working on my passion project – doing a book that documents all of the terrestrial orchids that can be found in the York area. This has been a long undertaking, nearly twenty years. Why so long? Well a lot don’t flower every year as the require a bushfire the previous summer to stimulate them. The list of orchids has grown quite considerably longer from when I started. I naively thought it would be about twenty as initially I kept seeing the same few species over and over again. Now it sits at 80 and I’m pretty sure I still find more if I devote another 20 years to the project, but I’ve decided to draw a line and crack on with selecting the photos and writing the accompanying text.

 

 

The last couple of weeks has seen me proof printing and this has been quite informative. Firstly I use a colour profiled system. I shoot in the Adobe RGB colour space and the screen is profiled as is the printer. So in theory what I see in the camera should be what appears coming out of the printer. Except it hasn’t. There’s no weird colour casts or shifts the problem is the exposure. Because I’ve not printed anything since my last exhibition my pictures have become progressively darker as I’m just producing photos to be viewed on a back illuminated screen rather than an opaque surface. Consequently most of photos are underexposed and don’t print well. So what I’ve been doing is shooting a 10x15cm test print for every proof print. I’ve worked out that I’ve under exposed by 1 stop, but it isn’t as simple as increasing the exposure by that amount as that affects colour saturation and contrast. So it’s been a slow process of individually adjusting each photo. I will have made the shareholders of the ink and paper companies very happy. I’m nearly finished – at the time of writing I’ve got just ten more to do. During this I realised how much I’ve missed printing. A good print is a beautiful thing and I really should get on and make more. I’m also getting the itch to have a darkroom again and make black and white prints.  But, first things first lets finish this project.

 

 

 

By now you will have noticed that the photos accompanying this entry bear no relation to it. I thought pictures of prints emerging from a printer would be boring as would shots of the ink cartridge mountain. So I did have to go into Perth for a meeting and when that had finished I decided to have a walk around the back streets of Northbridge. I must say Perth is in danger of becoming interesting – I know that the citizens of Melbourne and Sydney will be derisively laughing at this – but Perth is looking a lot more colourful and brighter than it did when I first arrived here. It’s good and I hope it continues.

 

 

I’ve included the photo of the poster adverting Ecoland Kangaroo Essence as the thought of it just cracks me up.  I looked up what the manufacturers say about their product and it made me laugh all the more.

 

 

I’ve visions of lots of elderly oriental men bouncing around chasing their wives.

Awwwww….

…crap!

 

This about sums up the last couple of weeks. Kakak or Little Pied Cormorant (Phalacrocorax melanoleucos).

 

I haven’t felt like posting anything for the last couple of weeks. I’ve been taking photos, but for a number of reasons haven’t had anything positive to say.

The minor issues have been consumer affairs related. I use Adobe products and have done since Adobe Photoshop 4. That’s not CS4 but the 1996 version of Photoshop. Adobe have an incredible disdain for their customers and seem to forget that without us they would be nothing. I like their products, especially Lightroom, it’s Digital Asset Management is fantastic, but being hobbled to Adobe is a right royal pain in the posterior.   Anyway before I start ranting and foaming at the mouth I’ll get on and say that I’ve already started to shift my whole workflow to different software which has resulted in quite a steep learning curve. The next consumer problem that has proved incredibly frustrating is that I bought a new Apple iPhone and it was wasn’t working properly straight out of the box – the battery won’t hold a charge and the home button doesn’t work. Apple have proven that like Adobe they too hold their customers in complete contempt. I’ve been batted back and forth between various Apple departments who are arguing over who is responsible. The only thing that they agree on is that they won’t replace my phone, won’t repair it, and won’t give a refund. Again I’ve been using their products for decades and have liked the Apple ecosystem, but now it looks like I’ll be changing. I haven’t used a Windows computer since Windows 98 and I’m not looking forward to switching back.

The major problem has been with our beloved dog – Frida. She was due to have her teeth cleaned by the vet, and as that involved having an anaesthetic the vet did a few tests to make sure she’d be OK. The results showed that she has stage 2 renal failure which left us gobsmacked. Bull Terriers are notorious for kidney problems and she is getting old. The vet was very good and suggested putting her on a renal diet for 8 weeks and see whether she improves. So this saw me searching on the internet for a reputable diet for her. We ruled out quite a few because they suggested things like elk and reindeer which aren’t very abundant here in Australia. The main worry was finding something she’d actually like to eat because one of the symptoms of renal disease is that the patient can become quite nauseous and go off their food. She has started her diet and things on the surface look to be improving already so we’re keeping our fingers crossed.

 

Relaxing in her favourite chair.

 

Watching BritBox TV.

 

Hopefully normal service will be resumed as soon as possible.

Nannup Distractions

We’ve been to Nannup in the Blackwood Valley several times before and I’ve written about one of this visits before.  Last time I photographed orchids this time I meant to do some bird photography. I only managed to take a couple of bird photos on the first day – of a female Red-winged Fairy-wren (Malurus elegans) – as I got distracted and didn’t take the birding stuff out for the rest of the week.

Djoordjilya by Paul Amyes on 500px.com
A female Red-winged Fairy-wren (Malurus elegans) called Djoordjilya by the indigenous Nyoongar. . Nannup, Western Australia.

 

The cause of this distraction. Well as a last minute decision I’d decided to throw a film camera, a 50mm lens and a couple of rolls of film into my bag. At first I was just going to take nature photos while walking along the river foreshore. It was just initially to explore forms and textures. But, it wasn’t long before I was walking up and down the streets of Nannup (there aren’t many) taking pictures of anything that caught my eye. I have a particular fascination with signage – I often find it quite amusing.  Anyway the results are below.

 

Grasses and Bokeh
Grasses and Bokeh. Wild grasses growing along the banks of the Blackwood River in Nannup.

 

Lichen
Lichen growing on a tree trunk. Nannup, Western Australia.

 

Falling Limbs
There were arms and legs all over the place. Nannup, Western Australia.

 

Ducks Crossing

 

It wouldn’t be Nannup without any mention of the the Nannup Tiger or thylacine.

 

Stripes In The Forest

The Tigers were everywhere threatening to pounce out on the unsuspecting.

 

Thylacine #1

 

Thylacine #2

 

Support Needed

Tripods must be one of the least sexy items of photographic equipment, but over the last couple of years they have occupied a lot of my thinking.

For a long time (over 20 years) I’ve used a couple of Manfrotto tripods. One for video and one for general photography. Both are aluminium, both large and both heavy. So heavy that they could be used as boat anchors. When I first started photography some 40 years ago there was a saying that you could judge how serious a photographer was by the weight of his/her tripod. By that criteria I must’ve been very serious. When I started using mirrorless cameras with a combination of In Body Image Stabilisation (IBIS) and lens based Image Stabilisation (also called Optical Stabilisation) I thought I could do without a tripod, but, I quickly realised the error of my ways. Now if my photography was just limited to a studio or somewhere I could just work out of the back of my car then the two Manfrottos would be be fine, but I don’t and I usually find myself carrying a tripod out in the bush for hours, and as I’ve a bad back weight has become a big factor. Another criteria is that most of what I photograph or video is close to the ground so a tripod should be able to open up as flat as possible. The final selection criteria was that I shouldn’t have to sell vital organs to afford them. I looked at Manfrotto and Gitzo and had a severe episode of wallet contractions. When they subsided I began to look at other alternatives. The last decade or so has seen a number of Chinese companies start to compete with the established companies. At first they just made cheap knockoffs of other brands, but now they have come to be real innovators while offering incredible value for money. Sirui are one one of those companies.

With this blogpost I’ll look at what I bought for wildflower photography. There’ll be another entry that deals with my solution for wildlife photography and video.


Sirui AM-254 Tripod with A-10R Ball Head

My criteria for a tripod for wildflower photography were that it had to be light and be able to get down to ground level without mucking round with a centre column. It also had to be sturdy enough to allow me to focus stack when using long lenses. Sirui’s AM Series of Compact Travel Tripods seemed to fit the bill nicely. It was then just a matter of reading spec sheets and making a decision.

 

Sirui AM-254 Tripod
The Sirui AM-254 is a light weight carbon fibre travel tripod.

 

Sirui AM-254 Tripod
To extend the tripod legs you use these twist locks. They are a sealed rubber material designed to prevent wear and tear. The standard foot is this rubber one.

 

Sirui AM-254 Tripod
The rubber feet can be easily replaced with spikes if needed. The spikes come with the tripod.

 

I decided to get the AM-254 tripod and A-10R ball head kit.  The tripod legs are made of carbon fibre and has four leg sections which are held in place by rubber twist locks which are described as being sealed and “wear resistant”. The legs have a load capacity of 12Kg and weigh 1.04Kg, have a maximum height of 127cm and a minimum height of 14.5cm. The tripod has rubber feet that can be replaced the included metal spikes. There’s a removable stabilising hook which came loose and got lost which didn’t particularly worry me as I never use it. The A-10R head has a load capacity of 20Kg, a ball diameter of 33mm and weighs 360g. It is Arca Swiss compatible and comes with a quick release plate.  The whole kit weighs 1.4Kg and collapses to a 52.5cm long package that fits nicely to the side of my photo backpack. The tripod and head comes in a padded carrying case with a set of hex keys for maintenance. 

 

Sirui AM-254 Tripod
The Sirui AM-254 is small and light enough to be carried on a photo backpack comfortably.

 

After 18 months of use this is what I have found. The kit has survived being dragged through the bush and appears to be very robust. When you open the tripod up to its maximum height it is not very stable as the the lower two sections of the legs are very narrow and flex a lot. That’s fine as I have never used it like that. The locking levers on the tripod crown are very positive and allow you to set the legs at three different angles. To deploy the tripod is a cinch and I can set it up at ground level in just a couple of seconds. 

 

Sirui AM-254 Tripod
The AM-254 legs are carbon fibre and the attach to the cast alloy tripod yoke with adjustable hinges. The leg angle can be adjusted to one of three positions via the blue leg locks.

 

Sirui AM-254 Tripod
The AR-10 ball head attached to the AM-254 tripod legs.

 

 

The head I didn’t get on with. It’s well made to tight tolerances and feels very sturdy. It’s just small things like being unable to see the spirit level when the quick release plate was in place and the fact that on my example the safety lock didn’t hold the camera securely which led to a couple of fraught moments with lots of swearing. So I swapped it out for a  Sunwayfoto FB-44II ball head with a Sunwayfoto MAC-14 clamp that is both Arca Swiss and Manfrotto 200PL compatible that addresses the problems.

 

Sirui AM-254 Tripod
I replaced the Sirui AR-10 ball head with this Sunwayfoto FB-44II ball head.

 

Sirui AM-254 Tripod
The Sunwayfoto FB-44II is fitted with the Sunwayfoto MAC-14 which is both Arca and Manfrotto RC2 compatible.

 

So what can I say? It is a small lightweight tripod that is very well made and it fits my needs very well.

 

20200818-Beverley-0002-Edit
The Sirui AM-254 meets my needs perfectly for macro and close up work out in the bush.

Happy Christmas

Ho Ho Ho!

 

Well I’d like to say that Christmas crept up on me unawares, but the reality was that mince pies Christmas pud were in the shops back in September. I still find it hard to celebrate what is essentially a Northern Hemisphere winter festival in the middle of a baking Southern Hemisphere summer. But I like to wish everyone a Merry Christmas and a happy, safe and prosperous New Year.

 

Christmas decorations in the Wheatbelt Metropolis of Northam.

Thrown A Fetlock

I’ve not been very active of late. I’ve had a few niggling injuries that’ve meant that I’ve not been able to get out and about much. What little photography I’ve done, and it is very little, has been taking piccies of the garden birds. Hopefully over the next week or so I’ll start getting out and about again.

 

Kool-boort by Paul Amyes on 500px.com

Kool-boort or Singing Honeyeater (Gavicalis virescens) in my back garden.

 

Bandin by Paul Amyes on 500px.com

Bandin or White-cheeked honeyeater (Phylidonyris nigra) in my back garden.

Merry Christmas

Perth Christmas Decorations 2022 by Paul Amyes on 500px.com
City of Perth Christmas Tree in Forest Place, Perth.

 

We’re gearing up for West Aussie Christmas. Temp here in the Wheatbelt metropolis is expected to be 38ºC or 100ºF so it’s a case of staying under the  aircon and Christmas lunch can’t involve the oven. Hope everyone stays safe over the holidays and has a great time.

 

Perth Christmas Decorations 2022 by Paul Amyes on 500px.com

Santa warming up for the Boxing Day test.

The End Of An Era

Celebrate Queen and corgi. Chichester.

 

It doesn’t seem like ten years ago I was in England at the time of Queen Elizabeth’s diamond jubilee. England was really buoyant then with the Jubilee and then the London Olympics lifting everyone’s mood. It was quite profound lots of happy people in the street dressing up and partying. It was Britain at its best. Anything seemed possible.

 

On the Saturday of the celebration people in Windsor dressed to show their alliegence to the Queen and to join in the festive mood.

 

On the Saturday of the celebration people in Windsor dressed to show their alliegence to the Queen and to join in the festive mood.

 

Royal Family face masks on top of suitably captioned tea mugs.

 

Celebrate Queen and corgi. Chichester.

 

Ten later we’ve had Brexit, Boris, COVID, inflation and growing social inequality and now the death of the Queen. It must feel like the stuffing has been kicked out of the country. I’m not a fan of the monarchy – I think that they are an anachronism, a relic from feudal times that has no place in a modern society. But, having said that Queen Elizabeth II was a constant presence who gave the impression that she’d just go on for ever and now she has gone. I wonder whether Charles will be able to engender the same feelings or whether he will be the king who turns Britain into a collective of republican states. It will be interesting to see what the next ten years will bring.

 

Queen Elizabeth II souvenirs in a tourist shop outside Windsor Castle.

 

 

 

 

 

Journey to Jooralying

Out and about again looking for orchids and birds. This trip took me to the Old Jooralying townsite just east of Narrogin. It was marked as such on my mud map but other than that I could find no other reference to it. When I got there there wasn’t too much to see. Amongst the scrubby rock sheoaks  were some faint trails that once could have been dirt roads, and a few old timbers from some sort of structure. A bit more investigation and I found an old car wreck. It was remarkably intact considering how long it must have been there.

Abandoned car at the Old Jooralying Townsite in Western Australia.

 

It took a while but eventually I found the orchids – a small colony of them. They’re nothing special to look at, but they are a variety I’d not seen or photographed before so that made the journey worthwhile.

 

Cupped Banded Greenhood by Paul Amyes on 500px.com
Cupped Banded Greenhood, Pterostylis concava. Jooralying, Western Australia.

 

Cupped Banded Greenhood by Paul Amyes on 500px.com

Cupped Banded Greenhood, Pterostylis concava. Jooralying, Western Australia.